|
Product Details:
|
| Carbon Content: | High Carbon | Model: | I-75L |
|---|---|---|---|
| Application: | Low Pressure Casting Mold Release | Usage: | Sanitary Industry |
| Specifications: | As Your Requirement | Product Name: | Graphite Mould Releasing Agent |
| Feature: | Imperishable | ||
| High Light: | Imperishable Graphite Release Agent,Sanitary Graphite Release Agent,High Temperature Casting Graphite Mould |
||
Graphite Release Agent For High Temperature Casting Graphite Mould Casting
Graphite Mould Releasing Agent
Our standard mould releasing agent is named I75L. It is a powder made on the basis of graphite and other carbon and mineral materials.
I75L is used as an immerse product (dip-product) applied with the foundry of brass after the techniques of manual, mechanical and low pressure. It is also suitable for lead-free brass casting.
Benefit of using I75L: longer durability of the die, uniform surface of the castings, less subsequent after work of the casting.
Graphite Release Agent I75L
Description
I75L graphite mold release agent, is a temperature of maximum 1000 ℃ high thermal resistant release agent,environmental protection, non-toxic, have excellent film-forming properties,has protective effect to mold.The lubricant can make the product forming high transparency,smooth,increase productivity.
Product Features
1.Non-toxic, environmental protection products.
2.Good stripping performance, make the product smooth finish.
3.Excellent heat resistance and film-forming properties, even in rapid heating at 1500 ℃ temperature, cooling repeatedly not to be break.
4.Prolong the life of the mold, and shorten mold cleaning time, reduce surface defected products.
| Specification | Graphite I75L is a powder made on the basis of graphite and other carbon and mineral materials. |
| Application | Graphite I75L is used as an immerse product (dip-product) applied with the foundry of brass after the techniques of manual, mechanical and low pressure. Suitable for heated metal molds. |
| Treatment | ◆ Graphite I75L is mixed in distilled water or deionization water in the proportion of 1:10 and is at once ready for use. ◆ The proportion can be changed according to the weight and thickness of the sides. ◆ Heat the mold to at least 120℃ before using I75L. ◆ It is recommendable to keep the whole liquid in motion by appropriate device (stirring apparatus). |
Contact Person: Hera Huang
Tel: 13220942308
Fax: 86-0532-8099-3622
