|
Product Details:
|
| Product Name: | Graphite Release Agent | Fix Carbon: | 81.56% |
|---|---|---|---|
| Ash: | 18.78% | Moisture: | 0.2% |
| Mesh: | 980 | Application: | Mold Release |
| High Light: | M75 Water Tap Graphite Release Agent,0.2% Moisture Mold Release Agent,M75 graphite mold release |
||
Perfect wall thickness of faucet.
The effect of adopting M75:
1. The longer service life of die.
2. Easy firstly polishing.
3. Unique casting surface.
| Product Name | Graphite Release Agent |
| Fix carbon | 81.56% |
| ash | 18.78% |
| moisture | 0.20% |
| mesh | 980 |
| Application | Mold Release |
| Specification | Graphite I75L is a powder made on the basis of graphite and other carbon and mineral materials. |
| Application | Graphite I75L is used as an immerse product (dip-product) applied with the foundry of brass after the techniques of manual, mechanical and low pressure. Suitable for heated metal molds. |
| Treatment | ◆ Graphite I75L is mixed in distilled water or deionization water in the proportion of 1:10 and is at once ready for use. ◆ The proportion can be changed according to the weight and thickness of the sides. ◆ Heat the mold to at least 120℃ before using I75L. ◆ It is recommendable to keep the whole liquid in motion by appropriate device (stirring apparatus). |
Graphite Mold Release Agent for Low-pressure casting
Dosage: 1. Begin with 60kgs graphite and 350kgs water
2. The proportion can be changed according to the weight and thickness of the die sizes.
3. Clean the die before using.
Contact Person: Hera Huang
Tel: 13220942308
Fax: 86-0532-8099-3622
